To help us provide you with free impartial advice, we may earn a commission if you buy through links on our site. Learn more

- Affordable to buy and run
- Decent print speeds
- High-quality results
- Controls are dated
Canon’s Pixma MG5750 is a classic example of an inkjet multifunction peripheral (MFP) designed for home use. It’s a squat, smart-looking device, made from high-quality black plastics. It’s quite well specified, too: it can print, scan and copy, print automatically on both sides of a sheet of paper (duplex printing), and you can connect and share it on a wireless network. Not bad for an all-in-one printer which costs around £50.
Canon Pixma MG5750: Features and design
The only mild disappointment is that there’s no fax modem included, but sensibly Canon has included support for more modern cloud-based printing services. The Pixma MG5750 can be set up to print from cloud services such as Google Drive, but bear in mind that it’s not as straightforward as it should be – the process is far more involved than it is for products from rival manufacturers such as HP.
As a mid-range device, this Pixma gets Canon’s unusual five-ink print engine, which combines dye-based black, cyan, magenta and yellow inks with a bigger, pigment black tank for better text printing. While that’s a good thing, we’re disappointed that the MG5750 is lumbered with a clunky control system. Rather than touch input, its menus are navigated with a four-way rocker switch paired with three dedicated buttons below the screen – we’ve long criticised this setup, which can be inconsistent and confusing.

The MG5750 inherits another feature we’ve criticised before. Its ink cartridges are reached by raising up the cantilevered control panel, but the access is a bit restricted at the rear of each slot. Also, although the slots are clearly marked, it is physically possible to insert the dye-based cartridges in the wrong slot – we’re not sure why there’s no keying to prevent this. The printer’s paper trays have an unusual layout where printed pages spill onto a stop that pivots out of the input tray – it looks basic, but the neat design does keep everything tidy.
Canon Pixma MG5750: Printing, scanning and copying performance
Fortunately, these fairly minor grumbles couldn’t spoil another great mid-range home MFP. While it isn’t exactly fast, it delivered standard quality text at 11.5 pages per minute (ppm), and produced our complex colour graphics test at 3.6ppm, which is fine at this price. The scanner was quick enough at low resolutions, with a 300 dots per inch (dpi) A4 scan needing just 19 seconds, but even using a USB connection, we needed 103 seconds to capture a postcard-sized photo at 1,200dpi. Making a black photocopy of an A4 page took just 13 seconds, but in colour this rose to 30 seconds.
Undoubtedly, this MFP’s best feature is the all-round high quality of its results. Text and graphics printed on plain paper were bold and crisp, while its photo prints were as good as you’ll get from a mid-range inkjet – free of grain, and impressively sharp. Photocopies were faithful to the original, while scans were also sharp, with accurate colours and a high dynamic range.
Running costs are another strong point for Canon’s affordable little all-in-one. Stick to Canon’s XL ink cartridges (the smaller cartridges are a false economy) and this MFP will print each A4 page of mixed text and graphics for about 6.3p, which is competitive.
Canon Pixma MG5750: Verdict
While we’ve a couple of minor reservations about its design, the MG5750 is affordable to buy and run, has decent speeds and delivers great quality results. It’s a great all-rounder for the home, and even though it’s getting a little long in the tooth (we first reviewed it in January 2016) it remains a deserved winner of our Best Buy award in 2018. The arrival of the similarly priced Pixma TS5050 means that it’s not without competition, however, so you’d be wise to check the prices of both models before taking the plunge.